Direct download links for Firefly II Stock Firmware ROM (flash file) on your Computer. Firmware comes in a zip package, After extracting the package you will be able to get the “Flash File, Flash Tool, USB Driver and How-to Flash Manual“. First Install the provided USB Driver on your Computer, and if in case USB Driver is already installed, SKIP this. Follow the How-to Flash Manual to Flash the Firmware on your Firefly II Device.
Download and flash it in your Firefly device and again enjoy the native Android experience again by seen Android as new factory outlet phone. The download file contains the USB driver, flash tool, and the scatter file.
Download Firefly II Stock Firmware (flash file)
File Name: Firefly_II_MT6589_V47_20130104_4.1.2.zip
File Size: 255 MB
Firmware Link: Click Here to Start Download
Take a Backup fist: Before flash the above Firmware on your Firefly II device, first take a full backup all data files and contacts because all data will be deleted after flashing the stock firmware.
Note: Here in MobilePhoner.com we provided firmware on this page is officially release by the company website and it helps you to recovery your device if you ever got bootloop, software error, update error, hanging and dead issue.
How To Flash Stock ROM Firmware On Firefly
Step 1: Download the stock ROM zip file given above links and extract /unzip it on your computer desktop. (after extracting we can see SP flash tool and Android scatter file).
Step 2: Now download Firefly II USB driver and install it on your computer. ( If already installed USB driver on your computer skip this step.)
Step 3: switch off your Firefly II smartphone and remove the battery (if it is removable).
Step 4: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.
Step 5: click on “Download” tab.
Step 6: click on “scatter-loading” button in the right side of download tab.
Step 7: Next, click on “Open Scatter File” and select the scatter file from Step 1.
For reference see the image given below.
Step 8: click on the “Download” button to start the flashing process.
Step 9: Next, connect your Firefly II Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.
Step 10: The flashing process will begin momentarily, and it will get completed in a minute or two. Once it is over, finally you will see the “Download OK” green ring in SP Flash Tool.
Step 11: finally, close SP Flash tool on your computer and unplug your smartphone.
That’s it. Now you have successfully flashed stock ROM firmware on your Android device.