Download Walton Primo E7 Plus USB Driver CDC, VCOM, ADB

You are here because you are an owner of Walton Primo E7 Plus mobile and looking out for usb drivers to connect your device to the computer / Laptop, then you are in the right website. Here in you can find any mobile USB Drivers, Firmware’s (Stock Ram), Rīki, Android Apps and How to guides. Download Walton PPrimo E7 Plus USB driver from here, install it on your computer and connect your device with PC or Laptop successfully.

There are 3 usb driver available for your device. 2 of them can be used to flash the stock firmware on your Mediatek Device and Last ADB is for normal connecting the device to the computer/PC.

Note it:

If you got Driver Signature Error When installing the Driver then See this Video to fix this problem.

If you are trying to flash stock firmware on your device then download CDC and VCOM Driver Only. ADB Driver will not work for flashing the stock firmware.

Download Walton Primo E7 Plus driver For Flashing Firmware

Download Walton Primo E7 Plus driver For Normal Connecting

How To Install Walton Primo E7 Plus ADB Driver In Computer / Laptop:

Solis 1: first Download ADB driver zip file (from the link given above) and extract/unzip it to a folder on your computer desktop.

Solis 2: Then, open “Ierīču pārvaldnieks” on your computer and follow this path: Action -> Add Legacy Hardware.

Solis 3: Once you click on “Add Legacy Hardware“, a “Add Hardware Wizard” window will open up. Click on “Nākamais” to continue with the installation of ADB USB driver.

Solis 4: Tagad izvēlieties "Install the hardware that I manually select from a list (Papildu)” option and click on “Nākamais“.

Solis 5: Net choose 1st option “Show All Devices"Un noklikšķiniet uz"Nākamais“.

Solis 6: Here, we need to select the device driver that we want to install on PC.

click/Tap on “Have Disk” button and browse the folder where(desktop) you have extracted the device ADB USB driver.

Solis 7: klikšķiniet uz "Nākamais” to start install Android ADB Interface on your computer.

Solis 8: If a Windows prompt window shows up asking for a confirmation to install the device software, just click on “Uzstādīt“. Once the installation process is completed, klikšķiniet uz "Pabeigt” to close the “Add Hardware Wizard“.

This below image is the final step.

Tieši tā. successfully installed ADB USB driver on your computer.

How To Install Walton Primo E7 Plus CDC and VCOM Driver In Computer:

Here are steps to follow installation, 8th step may ask in some case only.

  1. Download the CDC Drivers and Unzip the file on your desktop
  2. Tās pilns process ir norādīts zemāk. redzēt šo Ierīču pārvaldnieks
  3. Click on add the legacy hardware
  4. After That Click on next
  5. choose to Instalējiet aparatūru, kuru manuāli izvēlos no saraksta (Papildu)
  6. click on next
  7. choose Rādīt visas ierīces and click on next
  8. select usb2ser_Win7 for 32 bit or Choose usb2ser_Win764 for 64 bit (this step for VCOM Driver)
  9. click Nākamais again
  10. Select Pabeigt

How To Install Qualcomm Driver In Computer

  1. Download the Qualcomm Driver and Unzip the file on your desktop
  2. Tās pilns process ir norādīts zemāk. redzēt šo the setup file
  3. After That Click on next
  4. Select I accept the terms in the license agreement un click on next
  5. click Uzstādīt
  6. Select Pabeigt

Supported Operating Systems 32-bit (x86) / 64-bit (x64)

  • Windows
  • Windows XP
  • Windows Vista
  • Windows 7
  • Windows 8 un 8.1
  • Windows 10

Here in you can find all mobile USB draiveri, Programmaparatūra (Stock Rom), Rīki, Android Apps, How to guides and upgrade tutorials, custom recovery installation tutorials utt…

Did not find the USB driver for your Walton device here? Do let us know by leaving a comment below.


Atstājiet savu komentāru