Download Walton Primo E7s USB Driver CDC, VCOM, ADB

You are here because you are an owner of Walton Primo E7s mobile and looking out for usb drivers to connect your device to the computer / Laptop, then you are in the right website. Here in you can find any mobile USB Drivers, Firmware’s (Stock Ram), Gereedschap, Android Apps and How to guides. Download Walton Primo E7ss USB driver from here, install it on your computer and connect your device with PC or Laptop successfully.

There are 3 usb driver available for your device. 2 of them can be used to flash the stock firmware on your Mediatek Device and Last ADB is for normal connecting the device to the computer/PC.

Note it:

If you got Driver Signature Error When installing the Driver then See this Video to fix this problem.

If you are trying to flash stock firmware on your device then download CDC and VCOM Driver Only. ADB Driver will not work for flashing the stock firmware.

Download Walton Primo E7s driver For Flashing Firmware

Download Walton Primo E7s driver For Normal Connecting

How To Install Walton Primo E7s ADB Driver In Computer / Laptop:

Stap 1: first Download ADB driver zip file (from the link given above) and extract/unzip it to a folder on your computer desktop.

Stap 2: Then, open “Apparaat beheerder” on your computer and follow this path: Action -> Add Legacy Hardware.

Stap 3: Once you click on “Add Legacy Hardware“, a “Add Hardware Wizard” window will open up. Click on “Volgende” to continue with the installation of ADB USB driver.

Stap 4: Now choose “Install the hardware that I manually select from a list (Geavanceerd)” option and click on “Volgende“.

Stap 5: Net choose 1st option “Show All Devices" en klik op "Volgende“.

Stap 6: Here, we need to select the device driver that we want to install on PC.

click/Tap on “Have Disk” button and browse the folder where(desktop) you have extracted the device ADB USB driver.

Stap 7: Klik op "Volgende” to start install Android ADB Interface on your computer.

Stap 8: If a Windows prompt window shows up asking for a confirmation to install the device software, just click on “Installeren“. Once the installation process is completed, Klik op "Finish” to close the “Add Hardware Wizard“.

This below image is the final step.

Dat is het. successfully installed ADB USB driver on your computer.

How To Install Walton Primo E7s CDC and VCOM Driver In Computer:

Here are steps to follow installation, 8th step may ask in some case only.

  1. Download the CDC Drivers and Unzip the file on your desktop
  2. open Apparaat beheerder
  3. Click on add the legacy hardware
  4. After That Click on next
  5. choose to Installeer de hardware die ik handmatig uit de lijst selecteer (Geavanceerd)
  6. click on next
  7. choose Toon alle apparaten and click on next
  8. select usb2ser_Win7 for 32 bit or Choose usb2ser_Win764 for 64 bit (this step for VCOM Driver)
  9. click Volgende again
  10. Select Finish

How To Install Qualcomm Driver In Computer

  1. Download the Qualcomm Driver and Unzip the file on your desktop
  2. open the setup file
  3. After That Click on next
  4. Select I accept the terms in the license agreement and click on next
  5. click Installeren
  6. Select Finish

Supported Operating Systems 32-bit (x86) / 64-bit (x64)

  • Windows
  • Windows XP
  • Windows Vista
  • Windows 7
  • Windows 8 and 8.1
  • Windows 10

Here in you can find all mobile USB-stuurprogramma's, Firmware (Voorraad Rome), Gereedschap, Android-apps, Handleidingen en tutorials upgraden, custom recovery installation tutorials etc

Did not find the USB driver for your Walton device here? Do let us know by leaving a comment below.



Laat een reactie achter